Results 1 to 2 of 2

Thread: Front suspension; aim, simple and low cost (Ace and Chaser)

  1. #1
    Diamond geezer 500 Club
    Join Date
    Dec 2005
    East Yorkshire

    Front suspension; aim, simple and low cost (Ace and Chaser)

    Doodled up a simple suspension setup based on a pair of spare Quik shocks, four little 6mm flat plates, either hand cut or nip into a laser cutting workshop, pushbike 140mm disc brake from EBay and a 10mm through axle

    Drawings available if you fancy a crack

    BMAA 5696

    "If anybody ever tells you anything about an aeroplane which is so bloody complicated you can't understand it, take it from me: it's all balls."

    R.J. Mitchell :- Designer of the Supermarine Spitfire

  2. #2
    Senior Member 100 Club
    Join Date
    Feb 2015
    Inside Old Buck ATZ
    Nice job, Kev.
    Do you find it sufficiently stable laterally? I am guessing the temporary axle will be replaced by something which pulls up tight to tie the plates together and prevent the whole lot from twisting, especially when the brake is applied.
    Pete T.

    "A closed mouth gathers no feet".

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts