Announcement

Collapse
No announcement yet.

another AX2000 back in the air.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • another AX2000 back in the air.

    My newly acquired AX2000 C BUX is now ready to fly just waiting for a good calm day. My Plan is to fit a landing light and a power outlet in the next few weeks. Any one idea on the wiring for both please

  • #2
    another AX2000 back in the air.

    Landing light and power sockets are both on the Standard Minor Mod list, worth downloading them as they have loads of guidance:

    http://www.bmaa.org/files/smm_107_1_...er_sockets.pdf

    http://www.bmaa.org/files/smm_110_1_landing_light.pdf

    Guessing it's a 582, so both via the correct sized fuse from the switched power via the key?

    Comment


    • #3
      another AX2000 back in the air.

      Thanks for that Steve. I was wondering about were the connections would terminate. Behind the panel is a maze of wires which I have yet to follow to see where they end up.

      Comment


      • #4
        another AX2000 back in the air.

        The final plan drawing is almost finished with the addition of a 100uf 16v electrolytic capacitor between + and - on the input before the regulator and another 10pf bead tantalum non electrolytic after the two resistors again between the + and - on the output wires. Drawing shortly.

        Comment

        Working...
        X