Announcement

Collapse
No announcement yet.

Brauniger AlphaMFD

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Brauniger AlphaMFD

    Can anyone help me with recalibrating the altimeter function on the Brauniger. I have managed to recalibrate the Dynon and now have an error apparent on the Brauniger. The Operating and Installation Manual does not help and no set-mode setting is given for altimeter recalibration.

  • #2
    Brauniger AlphaMFD

    I reckon that it is about 50 feet out. I think I will live with it and use the Dynon. Had a hairy landing at Cromer today. As I flared the crosswind got under the port wing and induced a fair bit of roll! Landed on starboard wheel but got away with it. Ray

    Comment


    • #3
      Brauniger AlphaMFD

      Hi Ray/Anita,
      If you click this link I think Section 5.2 might just help you sort your 50ft error out !!

      http://www.brauniger.com/download/AL...9_Englisch.pdf

      Comment


      • #4
        Brauniger AlphaMFD

        Thanks Peter. We have a copy of the manual which does not cover recalibration. Brauniger have now advised that it has to go back to the factory for recalibration.

        Comment

        Working...
        X