Announcement

Collapse
No announcement yet.

Trim indicator

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trim indicator

    I need to take out the Trim indicator from out of the panel,I need to check wiring going into
    The unit. If I move the wires at back of the unit the LED light go up to the correct level
    and then reverts back to the bottom.
    This does suggest that there is a loose contact.Any suggestion from the forum would be a appreciated
    Thanks
    Colin

  • #2
    Trim indicator

    This sounds to me more like a corrosion problem in the wires (or possibly the connectors). I'm not familiar with the actual connectors to the trim indicator, but in general: if the wires seem sound when you flex them a few times, then just cleaning the connectors to the display unit might do the trick. If they are covered with a grey-ish deposit, then suspect some kind of contamination (salt a common culprit).

    In all cases, a clean metal-to-metal contact is the goal. If still no joy, it's possible that there's a [similar] problem inside the display unit.

    Mike

    Comment


    • #3
      Trim indicator

      Thanks Mike, appreciate your impute
      Colin

      Comment


      • #4
        Trim indicator

        Do let us know what you discover!

        Comment

        Working...
        X