Announcement

Collapse
No announcement yet.

Raven

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Does anyone have any Raven wing and trike line drawings? I'm not looking for technical drawings, just some line drawings out of interest. Cheers, Wyn

  • #2
    There's a crude line drawing at the back of the TADs. Download all of the Raven variants and take a look.
    Dave

    Comment


    • #3
      The Medway factory tends to put photographs in the TADS so you need to go back to the pre-certification TADS (type acceptance rather than type approval) to get a reasonable line drawing of the raven wing:

      http://bmaa.org/files/bmo33_1raven_puma.pdf

      The later trikes of the certified Medway manufacture and support are not per this TADS but there is no line drawing of either the Eclipser trike or the earlier Medway trikes on the TADS

      Hope that helps

      Comment


      • #4
        Haven't looked, but am sure the Southdown Raven and Raven X TADs do have line drawings Kirk.
        Both are certified TADs (BMxx).
        Dave

        Comment


        • #5
          Sorry Dave but all the current releases of the TADS on the medway supported Ravens have had any line drawings removed (if they ever existed) and there are photos only.

          You have to go as far back as the TAD on the accepted list I posted to get a line drawing of the wing and trike ... and the line drawing of the wing is a bit off on the leading edge curve that actually exists but it is a fair representation.

          Comment


          • #6
            Thank for this, the TADs sketch does nicely.
            Cheers
            Wyn

            Comment

            Working...
            X